Bandwidth management in Mikrotik Hotspot Area

Bandwidth management in Mikrotik Hotspot Area

Many users are always menannyakan about how to prioritize traffic traffic use RouterOS Hotspot service.
The following methods help to regulate network traffic and adjust it your way want.


 It also ensures the right to provide services for a specific use in a large network, giving priority to VIPs, the User or special services in a network which is too much.

Also, you can use the same method if you want to make sure the user that they should not download or upload a file as an long period to save the rest of the traffic available to the Light users who are looking for a good speed for browsing. 


It can be applied to memakasi burst limit or a combination of limit-at and burst limit with priorities. The trick with using the Users Profiles bandwidth management, and commissioned the kind of speed speed different from that associated with a particular group.
 Now for setting up trafficnya, we can use the following formula:


x1k/y1k x2k/y2k x3k/y3k x5/y5 P x6k/y6k 
placed in the user profile Rate Limit where: 
x1k/y1k: Rate (txrate / rxrate i.e 128k/1024k)
 x2k/y2k: Burst Rate (i.e 256k/2048k)
 x3k/y3k: Burst Threshold (i.e 160k/1280k)
 x5/y5: Burst Time (in seconds i.e: 60/60)
 Priority: P (use integer from 1-8)
 Minimum rate: x6k/y6k (i.e 32k/256k)

Well this is the screenshot:
 meaning of the above settings:
 Rate: 24k/128k 
Burst Rate: 32k/256k 
Burst Threshold: 24k/196k 
Burst Time: 30/30 
Priority: 8 Minimum 
rate: 16k/64k


Well later in the simple queue will look the same as setting the hotspotnya:

Now to check the priority of this view:
 Good luck ........

 with you 

Mohamed Samir