Chat Applications for Ubuntu

Quoting one of e-books

Chat Applications for Ubuntu

1. Overview:

In this section, we will discuss how to install and configure a IRC server, ircd-irc2. We will also discuss how to install and configure Jabber, an instance messaging server.

2. IRC Server:

The Ubuntu repository has many Internet Relay Chat servers. This section explains how to install and 

configure the original IRC server ircd-irc2.

2.1. Installation:

To install ircd-irc2, run the following command in the command prompt:

sudo apt-get install ircd-irc2

The configuration files are stored in /etc/ircd directory. The documents are available in /usr/

share/doc/ircd-irc2 directory.

2.2. Configuration:

The IRC settings can be done in the configuration file /etc/ircd/ircd.conf. You can set the IRC

host name in this file by editing the following line:

M:irc.localhost::Debian ircd default configuration::000A

Please make sure you add DNS aliases for the IRC host name. For instance, if you set
irc.livecipher.com as IRC host name, please make sure irc.livecipher.com is resolvable in your
Domain Name Server. The IRC host name should not be same as the host name.

The IRC admin details can be configured by editing the following line:

A:Organization, IRC dept.:Daemon <ircd@example.irc.org>:Client Server::IRCnet: 

You should add specific lines to configure the list of IRC ports to listen on, to configure Operator credentials, to configure client authentication, etc. For details, please refer to the example

configuration file

 /usr/share/doc/ircd-irc2/ircd.conf.example.gz.

The IRC banner to be displayed in the IRC client, when the user connects to the server can be set in /etc/ircd/ircd.motd file.

After making necessary changes to the configuration file, you can restart the IRC server using

following command:

sudo /etc/init.d/ircd-irc2 restart

2.3. References:

You may also be interested to take a look at other IRC servers available in Ubuntu Repository. It 

includes, ircd-ircu and ircd-hybrid.

• Refer to IRCD FAQ1 for more details about the IRC Server.

3. Jabber Instant Messaging Server

Jabber a popular instant message protocol is based on XMPP, an open standard for instant messaging, and used by many popular applications. This section covers setting up a Jabberd 2 server on a local LAN. This configuration can also be adapted to providing messaging services to users over the Internet.

3.1. Installation:

To install jabberd2, in a terminal enter:

sudo apt-get install jabberd2

3.2. Configuration :

A couple of XML configuration files will be used to configure jabberd2 for Berkeley DB user authentication. This is a very simple form of authentication. However, jabberd2 can be configured to
use LDAP, MySQL, PostgreSQL, etc for for user authentication.
First, edit /etc/jabberd2/sm.xml changing:

<id>jabber.example.com</id>

Note:
Replace jabber.example.com with the hostname, or other id, of your server.

Now in the <storage> section change the <driver> to:

<driver>db</driver>

Next, edit /etc/jabberd2/c2s.xml in the <local> section change:

<id>jabber.example.com</id>

And in the <authreg> section adjust the <module> section to:

<module>db</module>

Finally, restart jabberd2 to enable the new settings:

sudo /etc/init.d/jabberd2 restart 

You should now be able to connect to the server using a Jabber client like Pidgin for example.

Note:

The advantage of using Berkeley DB for user data is that after being configured no additional maintenance is required. If you need more control over user accounts and credentials another authentication method is recommended.

3.3. References:

• The Jabberd2 Web Site2 contains more details on configuring Jabberd2.
• For more authentication options see the Jabberd2 Install Guide3.
• Also, the Setting Up Jabber Server Ubuntu Wiki4 page has more information.

See you in the next lesson

Mr.Mohamed samir™