The –s Switch

The –s Switch
As with the –A and –a switches, the lowercase –s switch is similar to its uppercase sibling. The nbtstat –s command produces the same output as nbtstat –S except that it tries to resolve remote host IP addresses into host names, if possible. Figure 4.10 shows sample output from the nbtstat –s command. Note the similarities between Figure 4.10 and Figure 4.9.

FIGURE 4 . 1 0 Sample output of the nbtstat –s command

NOTE:

As you can do with the netstat command, you can place a number for an interval at the end of any nbtstat command to indicate that the command should execute once every so many seconds (as specified by the number) until youpress Ctrl+C.